2025 Landini Trekker3 Compact 3-085 S

Information

2025 Landini Trekker3 Compact 3-085 S

Landini expands its range of crawler tractors with the innovative Trekker3 Compact, a tracked tractor specially designed for use in narrow-row orchards and vineyards. Compact, nimble and efficient, the Trekker3 Compact will tackle tough terrains and steep inclines with ease, reaching where conventional tractors cannot reach. This new range consists of a single 3-085 model available in two versions: COMPACT and COMPACT S. The difference is the width of the soles. In the COMPACT version the width in mm is 280 - 310 (steel) / 300 (rubber) while for COMPACT S it is only 250 mm, with this configuration the soles are only available in steel.

Features may include:

Kohler engines

The new super compact STAGE V KOHLER KDI 2504 2.5-litre, 75-hp, four-cylinder turbo aftercooled engine with common rail injection system is designed for maximum efficiency and long-lasting performance.

Speed Four transmission

The rugged Speed Four transmission with synchro shuttle offers four synchronised gears and two mechanical ranges. The creeper provides up to 16 FWD + 8 REV gears and allows a minimum speed of 300 m/h.

Driving position

The platform is suspended on Hydro silent blocks to isolate the driving position from engine heat and to reduce vibrations generated by rough terrain and mechanical parts, ensuring a level of comfort never before achieved.

Photos

Highlights

  • Spallumcheen, British Columbia
  • 2025
  • Landini
  • Trekker3 Compact 3-085 S
  • Front Axle type: rigid 4WD
  • Speed Four | Control: Manually operated - 11” independent dry clutch
  • Available
  • 2200 mm (2486 w/top beacon light) Min-max over ROPS

Specifications

  • 2025
  • Landini
  • Trekker3 Compact
  • 3-085 S
  • Compact
  • Kohler
  • KDI 2504 TCR | Valves: 16
  • max (ISO): 75 / 55 hp / kW
  • Max torque: 315 Nm
  • 2500 cm3
  • Stage V
  • 4
  • Rear: Servoassisted dry clutch | Rotation: Clockwise (rear view) - 1-3/8” PTO shaft with 6 splines
  • Rear: 540 / 540E Rpm
  • Platform type: ROPS w/central tunnel w/side gears and reverse shuttle commands
  • Hydrostatic Hi-Drive | Control: Single lever operating left/right independent clutches and brakes
  • Reverse: Mechanical
  • Speed Four | Control: Manually operated - 11” independent dry clutch
  • 16+8 with “Underdrive”
  • Front: Leaf spring | Rear: Crossbar on independent track frames
  • Hydrostatic wet multidisc graphite brakes
  • Minimum: 300 m/h (w/creeper) | speed at 30 km/h: 2600 rpm
  • Hydraulic circuit type: Open centre - dual pump
  • Rear: Mechanical with position/draft/intermix/floating control | Circuit type - pump type: open center - twin pump | Rear remote valves: 2 | Free flow return
  • 180 bar
  • Flow rate hitch & remotes + steering: 50 + 30 l/min
  • Front Axle type: rigid 4WD
  • Cat.1 / Cat.2 - fixed ball ends
  • 1350 mm
  • 220 mm
  • 2200 mm (2486 w/top beacon light) Min-max over ROPS
  • Min length without front weights: 3050 mm
  • Max: 1150 mm
  • 900 mm | Shoe: 250 mm (metallic)
  • Tank: 45 l
  • Rear: 2600 kg
  • 3150 kg
  • 3050 kg
  • Front: 2x30 / 4x30 kg
  • Track tension adjustment system: Hydraulic track tension adjuster with permanently lubricated sprocket gear | Top track carrier roller: Sealed and permanently lubricated | Front weight: support Structural | Bottom track carrier rollers: 4 sealed and lubricated
  • Track shoe type: Metal