Country Tractor & Equipment

  • 4193 Noble Rd
  • Spallumcheen, BC V4Y 0K8
  • Call Us: (250) 546-3141
  • www.countrytractor.ca
Print This Page

2025 Kuhn RC 200 Series 295 Trailer

Information

2025 Kuhn RC 200 Series 295 Trailer

Outperform Expectations

KUHN Knight RC 200 Series Reel Commercial mixers provide the ultimate versatility, durability and performance. Four models are available in trailer, truck or stationary configurations, and offer capacities ranging from 500 to 950 ft³.

KUHN Knight RC 200 Series Reel Commercial mixers provide superior durability and performance with innovative options that separate them from the competition. For dairy and beef producers mixing rations with high percentages of roughages or distillers grains, this design gives them the ability to efficiently handle a wide range of materials.

Features may include:

Superior Feed Movement
  • The reel thoroughly mixes rations gently without causing excessive damage to the feed ingredients, preserving precious nutritional value for your herd. The large reel gently lifts material up into the side augers for excellent side-to-side movement. The upper auger moves material rearward, while the lower auger moves material forward for end-to-end mixing. This helps feed continually charge the door during discharge.
Low Fuel Consumption
  • Quality performance, with the lowest possible input costs is the goal of every operation. The fast, gentle mixing of KUHN Knight reel mixers helps maximize efficiency and minimize expense. The reel and auger design eliminates much of the force and pressure seen with other mixer types, resulting in low horsepower requirements and, correspondingly, less fuel consumption for economical operation.
Consistent Mixing and Discharge
  • KUHN Knight reel mixers provide a consistent mix, even with small batches, for a balanced ration from beginning to end. Their quick, even discharge with a more complete cleanout helps save time and maximizes efficiency.
Simple Feeding
  • With a high discharge point, these mixers allow for the use of a simple slide tray in most feeding situations. The long tray makes it easy to feed deeper into most bunks while preventing feed loss from the wind. This dependable, low-cost option also results in less maintenance.
The Unique Helix® Reel
  • The Helix reel has a robust build and has been thoroughly tested to withstand the most challenging conditions. The design of the reel crossbars evens the pressure across the length of the reel for smoother operation. It also engages with the feed more smoothly.
  • The open-center design eliminates obstructions in the reel and provides superior feed movement and unparalleled mixing action. The benefits are unmistakable, with faster, more consistent mixing, improved load leveling, optimized mixer space utilization and fewer dead spots for the ultimate in ration quality.
  • A mix bar runs diagonally across the center of the reel to help ensure consistent feed movement throughout the entire mixing chamber. The reel crossbars keep feed moving efficiently around the outside of the chamber. The secondary mechanical mixing action from the mix bar provides a fast and thorough mix even in wet, heavy rations with large amounts of distillers grains.

Photos

Highlights

  • Spallumcheen, British Columbia
  • 2025
  • Kuhn
  • RC 200 Series 295 Trailer
  • Available
  • Tread: 110" (279 cm)
  • Discharge Hinge: 56" (142 cm) | Slide Tray - Maximum: 50" (127 cm)

Specifications

  • 2025
  • Kuhn
  • RC 200 Series
  • 295 Trailer
  • Feed Wagons
  • 1,000 rpm | Minimum Power Requirement: 170 hp (127 kW)
  • Reel: 4.6 - 5.2 rpm
  • Adjustable Clevis
  • Lower Auger Flighting Diameter: 28" (71 cm) | Lower Auger Tube - Outside Diameter: 8 5/8" (22 cm) | Lower Auger Drive Shaft Diameter: 5" (12.7 cm) | Upper Auger Flighting Diameter: 28" (71 cm) | Upper Auger Tube - Outside Diameter: 8 5/8" (22 cm) | Upper Auger Drive Shaft Diameter: 4" (10.2 cm) | Reel Diameter: 84" (213 cm) | Reel Driveshaft Diameter: 8" (20 cm) | Lower Auger Tube - Wall Thickness: 1/2" (1.3 cm) | Upper Auger Tube - Wall Thickness:1/2" (1.3 cm) | Door Opening Size: 48" x 26" (122 x 66 cm) | Sidewall Thickness: 1/4" (0.6 cm) | End Panel Thickness - Front and Rear: 1/4" (0.6 cm) | Rear Hopper Thickness: 3/8" (1 cm) | Auger Hopper Thickness: 3/8" (1 cm) | Slide Tray - Maximum Reach: 30" (76 cm)
  • Lower Auger - Sectional: 5/8" (1.6 cm) | Upper Auger: 1/2" (1.3 cm)
  • Discharge Hinge: 56" (142 cm) | Slide Tray - Maximum: 50" (127 cm)
  • Mixing Chamber: 216" (549 m) | Haypan: 144" (366 cm)
  • 126" (320 cm) | Haypan Up: 22" (56 cm) | Haypan Down: 8" (20 cm)
  • Mixer Only (No Discharge): 120" (305 cm)
  • 294" (747 cm)
  • Tandem Axle: 4 1/2" (11 cm)
  • Slide Tray: 128" (325 cm)
  • Tread: 110" (279 cm)
  • Maximum Net: 28,500 lbs (12,927 kg)
  • 950 ft³ (26.9 m³)
  • Unit: 25,300 lbs (11,476 kg)
  • Reel Arms: 5 | Replaceable Sickle Knives on Upper Auger | Self-Sharpening Knives in Lower Auger Notches | Axle Configuration: Tandem Axle | Tongue Weight - % Gross: 12% | Weighing System: 4-point | Oil Bath Location: Rear
  • Roller Chain Drive: 100-140-160-200
  • Stainless Steel Side Liner: 7/64" (0.3 cm)
  • HD 10-bolt